METAL HARDNESS TESTING
Hardness tests have a wide field of use although, as commercial tests, they
are perhaps more commonly applied to metals than any other class of material.
The results of metal hardness tests may be utilised as follows:-
(1) Similar materials may be graded according to hardness
(2) The quality level of materials or products may be checked or controlled
by hardness tests. They may be applied to determine the uniformity of samples
of a metal or the uniformity of results of some heat treatment such as forming,
alloying, heat treatment or case hardening.
(3) By establishing a correlation between hardness and some other desired
property, e.g. tensile strength
(4) Comparison of weld metal hardness to parent metal hardness
Metal hardness test are carried out by Calspec using a portable Equotip hardness
tester which gives equivalent hardness readings in Brinell, Vickers and Rockwell.
The Equotip hardness tester is designed for testing metallic materials the
hardness of which ranges from very low to very high values. Typical applications
are large, heavy work pieces which are difficult to access.
RUBBER & PLASTIC HARDNESS TESTING
Durometer type A for hardness testing soft rubber and non-rigid plastics and
Durometer type D for harder rubber and plastics
Hardness testing a turbine blade from the Yarrawonga (N.S.W) Power
Station at Alstom workshops in Moonah
Hardness Testing Rubber Sample